Section 8

Whirlpool Tub, Combination Tub, Air Tub, #1 #2 #3 #4 Operating Instructions

For Combination series whirlpool tubs

NOTE: DO NOT START Whirlpool Tub PUMP UNTIL ALL JETS ARE SUBMERGED

Water level should be 3" above highest jet

#1-1st press: The blower starts at maximum speed, LED: ON

2nd press: The blower stops, LED: OFF

#2-1st press: Speed goes up, LED ON when pressing

Release pressure at the desired speed.

#3-1st press: Speed goes down, LED: ON when pressing

Release pressure at eh desired speed

#4-1st press: Slow pulsation cycle OFF, LED: ON

2nd press: Quick pulsation cycle OFF, LED: flashes

3rd press: Pulsation cycle OFF, LED: OFF

On/off air button control operates pump/jet action

Press the button once and the pump will turn on

Press the button again and the pump will turn off

Three speed pump control:

To operate the 3 speed control turn the dial to change the speed

H(High) to M(Medium) to L(Low)

Air Control volume knob:

Turning the knobs clockwise will reduce the volume of air jet pressure

Neck Massage pillow

Turning the dial clockwise will reduce the pillow jet pressure

down to 5%

*Before operating the Neck Massage pillow, make sure the white lycra

pillow cover is covering the gray pillow.

Underwater mood light on/off air button:

Press the button once and light turns on

Press the button again and the light turns off

Bulb replacement:

See page 12 for bulb replacement and lens instructions.

Inline heater control:

See page 12 for operating instructions.

Soul Soother jet pressure adjustment:

Turning the jet face clockwise will reduce the pressure

From 5% - 95% off.