Section 5 Whirlpool Tub, Combination Tub, Air Tub Installation Instructions 

1A Whirlpool Tub, Combination Tub, Air Tub Drop In, Island or Sunken Installation

1C Whirlpool Tub, Combination Tub, Air Tub Integral Tile Flange with or without Integral Skirt Installation 1D Attached Tile Flange

Typical Methods of Sealing & Finishing a Whirlpool Tub, Combination Tub, Air Tub

Make sure interior of Whirlpool Tub, Combination Tub, Air Tub is protected during finishing

PLUMBING:

After securing tub in place, waste and overflow, water spout and valves are installed per normal plumbing procedures, in accordance with all state and local standards.

Install standard 1 1/2" trap to drain and overflow. Before proceeding, make final operational check by filling tub with water to overflow and operate pump for 5 minutes. Check for leaks carefully both while pump is running and while turned off. Allow water to stand in tub for at least 30 minutes before draining. DENVER BATHTUBS WILL NOT BE RESPONSIBLE FOR WATER DAMAGE OF ANY KIND IN CONNECTION WITH ONE OF OUR WHIRLPOOL BATHS.

When selecting fill spout location, check to ensure that the spout is long enough to clear the tub rim from its desired location. If installation is to be on the tub deck, check the backside of the tub for adequate space for connection to water lines before drilling or cutting tub.

WARNING: HEATER AND ELECTRICAL

INSTALL: A service access panel of a minimum of an 18" square must be provided adjacent to motor/pump assembly.

Model A B

Spirit 1" 8"

Mystique jr 1 1/2" 9"

Tranquility 1" 9"

Mystique 5 1 1/2" 9"

Escape 534 1 1/2" 9"

Escape 536 1 1/2" 9 1/2"

Serenity 5 1 1/2" 9"

Eclipse 536 3" 9"

Escape 542 1 1/2" 8 3/4"

Paradise 5 6 1/2" 13"

Mirage 5 3 3/4" 7"

Retreat 1 1/2" 11"

Eclipse 5 3" 11"

Mystique 5.5 1 1/2" 9"

Escape 5.534 1 1/2" 9"

Escape 5.536 1 1/2" 9"

Serenity 5.5 1 1/2" 9"

Reward 5.5 2" 10 1/2"

Mirage 5.5 3 3/4" 9"

Eclipse 5.5 3" 11"

Haven 5.536 1 1/2" 8 1/2"

Mystique 6 1 1/2" 9"

Serenity 6 1 1/2" 9"

Heavenly 6 1 1/2" 11"

Escape 636 1 1/2" 9"

Mirage 6 3 3/4" 8 1/2"

Venetian 3" 10 3/4"

Tahoe 2" 10"

Eclipse 6 3" 11"

Cascade 4 3/4" 12 3/4"

Fantasy 5 1/4" 10"

Majestic 6 2 1/2" 8"

Fantasy 6.6 5 1/4" 15 1/2"

Serenity 7 1 1/2" 10"

Aspen 2 1/2" 24"

PLEASE NOTE:ALL DIMENSIONS GIVEN HERE ARE

CORRECT AS OF THIS PRINTING. DENVER BATHTUBS

PRODUCTS RESERVES THE RIGHT TO CHANGE

SPECIFICATIONS WITHOUT NOTICE.