Section 10 Continued: OPTIONAL UNDERWATER LIGHT AND CHROMATHERAPY MOOD LIGHTING for Whirlpool Tubs, Combination Tubs, or Air Tubs:

Operation:

UNDERWATER LIGHT for Whirlpool Tubs, Combination Tubs, or Air Tubs: Press the on/off button once to turn on light; Press it again to turn off the light

CHROMATHERAPY for Whirlpool Tubs, Combination Tubs, or Air Tubs: Press the button and the light turns on

1st press starts fast cycle off all colors 2nd press turns off

3rd press is the CLEAR color 4th press turns off

5th press is the GREEN color 6th press turns off

7th press is the YELLOW color 8th press turns off

9th press is the BLUE color 10th press turns off

11th press is the RED color 12th press turns off

13th press is the GREEN color 14th press turns off

15th press is the VOILET color 16th press turns off

17th press is BLUE to GREEN to BLUE 18th press turns off

19th press is RED to YELLOW to VOILET 20th press turns off

21st press fast cycle starts over

TO REPLACE THE BULB:

Disconnect the power to the bathtub.

Drain the bathtub.

Open the lens of the fixture using only the proper tool provided for that purpose.

Do not attempt to replace bulb without the proper tool. If a tool was not

provided, stop here and contact the factory.

Use only a type 912 replacement lamp.

Verify “O” ring is not damaged and is properly positioned in the groove when

replacing the lens. If there is damage or lens does not seal properly, do not

refill bathtub. Contact factory immediately.

NOTE: DO NOT TWIST BULB INTO SOCKET.

Use gentle pressure and push bulb into place.